My shortblock has arrived!!!
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
My shortblock has arrived!!! Got here today. 
Everything looks great! MAtt @ SDPC told me they were going to use ARP hardware on the main caps. I thought he was talking about ARP bolts, but turns out they used ARP STUDS 
All at a price less than what other big shops quoted me for stock hardware. I can't reiterate enough how awesome SDPC has come thru for me with everything so far 
Hell of a customer service guy Matt has been for me. I'd recommend them to anyone looking into anything from small parts up to a totally custom assembled longblock. They rock!
Heres the specs on the engine:
347ci LS6 fully machined block
GM LS6 crank with machined keyway for ATI superdamper
Compstar 6.125" H-Beam Rods w/ ARP 2000 bolts
Mahle 3.903" bore/ -4cc Pistons
ARP main studs
Looking forward to getting all the new parts put on so I can get closer to being back on the road
Everything looks great! MAtt @ SDPC told me they were going to use ARP hardware on the main caps. I thought he was talking about ARP bolts, but turns out they used ARP STUDS All at a price less than what other big shops quoted me for stock hardware. I can't reiterate enough how awesome SDPC has come thru for me with everything so far Hell of a customer service guy Matt has been for me. I'd recommend them to anyone looking into anything from small parts up to a totally custom assembled longblock. They rock!Heres the specs on the engine:
347ci LS6 fully machined block
GM LS6 crank with machined keyway for ATI superdamper
Compstar 6.125" H-Beam Rods w/ ARP 2000 bolts
Mahle 3.903" bore/ -4cc Pistons
ARP main studs
Looking forward to getting all the new parts put on so I can get closer to being back on the road
Last edited by ChevyChad; Mar 13, 2007 at 11:48 AM.
Originally Posted by john563
you mind if i ask waht it cost? pm if want
thanks
john
thanks
john
There are different things that go into the cost. Depends on how built it is for one. Plus, there are a zillion sponsors on here that will price out any combo you want.
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Originally Posted by orangeapeel
There are different things that go into the cost. Depends on how built it is for one. Plus, there are a zillion sponsors on here that will price out any combo you want.
Trending Topics
Luck SOB!!! I've been thinking about a stroker block 4 me so much that I had a dream about installing some piston rings on the head and inserting them into the block. I know I am wierd! 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
LOL. Well, I was going to get a stroker, but decided that would be too much for my P-1SC to keep up with. So a 347 it is for now Should make plenty of powa tho with a 3.4" pulley and a little meth 
Should make plenty of powa tho with a 3.4" pulley and a little meth 
Congrats bro. Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
I've been getting a lot of PM's asking price. I guess I better just post it up so my box doesn't overflow.
With the internals listed above, (new LS6 block, new LS6 crank, compstar rods, mahle pistons, clevite H bearings, and ARP main studs) price was $2900. Shipping was also less (by almost $100!) than the other places I checked as well
With the internals listed above, (new LS6 block, new LS6 crank, compstar rods, mahle pistons, clevite H bearings, and ARP main studs) price was $2900. Shipping was also less (by almost $100!) than the other places I checked as well
Nothing like the look of a fresh SB. You might as well go with ARP head studs as well.
Congrats. I know I wanted to sleep with my new block from LME when I got it. All shiny and mean looking. ooohh aaahhrrrh aahaaha (caveman sounds there)
Congrats. I know I wanted to sleep with my new block from LME when I got it. All shiny and mean looking. ooohh aaahhrrrh aahaaha (caveman sounds there)
Originally Posted by ChevyChad
I've been getting a lot of PM's asking price. I guess I better just post it up so my box doesn't overflow.
With the internals listed above, (new LS6 block, new LS6 crank, compstar rods, mahle pistons, clevite H bearings, and ARP main studs) price was $2900. Shipping was also less (by almost $100!) than the other places I checked as well
With the internals listed above, (new LS6 block, new LS6 crank, compstar rods, mahle pistons, clevite H bearings, and ARP main studs) price was $2900. Shipping was also less (by almost $100!) than the other places I checked as well
