H/C gaskets
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Dec 2004
Posts: 630
Likes: 0
From: Thibodaux Louisiana
H/C gaskets Did anyone on here buy new intake gaskets or just reuse the old ones? any other gaskets i'll need? I plan on reusing the ex. intake gaskets buy new head gaskets, head bolts, oil pump,pushrods,timing chain anything else i need as far as gaskets? are the front seal and timing cover reusable?
On The Tree
Joined: Jul 2005
Posts: 122
Likes: 0
From: Bay Area, California
http://www.sdparts.com/product/12499...oFirebird.aspx
This is what I used comes with:
This comprehensive cylinder head installation kit is for Camaro and
Firebird models equipped with the LS1 engine. The kit includes two
head gaskets, two valve cover gaskets, eight intake manifold
gaskets, two exhaust manifold gaskets, two intake-to-block seals
and 30 head bolts.
It worked good for me.
This is what I used comes with:
This comprehensive cylinder head installation kit is for Camaro and
Firebird models equipped with the LS1 engine. The kit includes two
head gaskets, two valve cover gaskets, eight intake manifold
gaskets, two exhaust manifold gaskets, two intake-to-block seals
and 30 head bolts.
It worked good for me.
I reused the old intake gaskets...they looked fine to me.
Some folks say the front cover gasket is re-usable, but I replaced mine while I was at it. Definitely need to replace the front seal.
Some folks say the front cover gasket is re-usable, but I replaced mine while I was at it. Definitely need to replace the front seal.
