lifter help
03-14-2007, 09:30 PM
#1
12 Second Club
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: shawnee,ks
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
lifter help im putting new lifter in my 2000 TA i have them out but im just wondering is there any special way the new ones have to go in or can i just drop them in like a traditional small block?
Thanks
Eric
Thanks
Eric
03-14-2007, 09:34 PM
#2
TECH Enthusiast
iTrader: (40)
Join Date: Jan 2006
Location: Scottsboro, AL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
I just dropped my new ones in once I had the cam back in the block and fastened down the the retainer plate.
Obviously they need to be oriented a certain way to ride correctly on the cam, but that's easy to do. The lifter trays aid in this as well.
Doesn't hurt to soak them in oil prior to installing. Some folks recommend at least a day for this.
Good luck!
Obviously they need to be oriented a certain way to ride correctly on the cam, but that's easy to do. The lifter trays aid in this as well.
Doesn't hurt to soak them in oil prior to installing. Some folks recommend at least a day for this.
Good luck!
