X1 Cam, Help!
10-14-2002, 04:23 PM
#1
TECH Addict
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Lake Jackson,TX
Posts: 2,879
Likes: 0
Received 0 Likes
on
0 Posts
X1 Cam, Help! What kind of power + TRQ, and curve will this cam give me. 230-227 .591 .571 112 lobe It`s their X1 cam(MTI). I`m getting MTI S2 heads also FLP headers, ORP, Corsa. Stock bottom-end. I will have a 12-bolt with 3.73 and Vig 3200. MTI is doing it as we speak! What do you think? This is on a 2001 WS6!
<small>[ October 14, 2002, 04:24 PM: Message edited by: beardWS6 ]</small>
<small>[ October 14, 2002, 04:24 PM: Message edited by: beardWS6 ]</small>
10-14-2002, 07:24 PM
#2
TECH Junkie
iTrader: (3)
Join Date: Nov 2001
Location: TEXASS
Posts: 3,202
Likes: 0
Received 0 Likes
on
0 Posts
Re: X1 Cam, Help! Through the Corsa I'd guess 415rwhp 380rwtq....You'll have to lock the convertor to get those numbers. (few dyno tricks) You'll lose some on the dyno with the 12-bolt, stall, and gears but it's going to run like a spotted *** ape. With a 6-speed and a 10 bolt you'd probably make 430-440rwhp....But you'd give up a hell of alot of strength(12-bolt) and performance for dyno numbers. On the spray LOOK OUT! 550rwhp?
10-15-2002, 06:02 AM
#3
TECH Addict
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Lake Jackson,TX
Posts: 2,879
Likes: 0
Received 0 Likes
on
0 Posts
Re: X1 Cam, Help! Yea`, I`m getting a 100 wet shot with a window switch 3000-6200 pills. Also LCA,Panrod,TRQ-arm,Sub-frames, relocation brackets (All BMR) <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> , got 17x11`s with 315/35/17 Nitto`s on back. Will pick her up Saterday with everything done! O Yea, getting a T-Rex fuel pump with 30lb injectors, and LS1 edit for tuning.
10-15-2002, 07:32 AM
#4
TECH Senior Member
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: X1 Cam, Help! Through a TH400 with a non-locking 3500 converter I got 370's rwhp and 430rwtq with the flash at 3000 and 455rwtq with the flash at 2000....
I also dynoed on slicks...so I would be well over 400rwhp if we took all the drivetrain losses away... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I also dynoed on slicks...so I would be well over 400rwhp if we took all the drivetrain losses away... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />