Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

I need some suggestions please..

Thread Tools
 
Search this Thread
 
Old 11-20-2002, 09:48 PM
  #1  
TECH Addict
Thread Starter
iTrader: (77)
 
black98ws6ta's Avatar
 
Join Date: May 2002
Location: louisville,ky
Posts: 2,107
Likes: 0
Received 2 Likes on 2 Posts

Default I need some suggestions please..

I just recently got my car back together from my rebuild I did, and the car misses and pulls the code 1123 (I think) it is bank 2 shifted lean. It only misses preety much everywhere except for in the upper rpm's. I thought that it might be a plug or even a couple of wires but I cant find any to trouble shoot the car with. Any ideas or suggestions on what I might have here? thanks
Old 11-20-2002, 09:56 PM
  #2  
TECH Addict
Thread Starter
iTrader: (77)
 
black98ws6ta's Avatar
 
Join Date: May 2002
Location: louisville,ky
Posts: 2,107
Likes: 0
Received 2 Likes on 2 Posts

Default Re: I need some suggestions please..

ttt
Old 11-20-2002, 10:14 PM
  #3  
TECH Senior Member
iTrader: (18)
 
DONAIMIAN's Avatar
 
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes on 0 Posts

Default Re: I need some suggestions please..

could be bad gas, how long did the gas sit in the tank before you started using it again. Check the ignition system, make sure all the wires to the coil are in the right order and then check the plugs. Also be sure to look over the injectors to make sure theyre clean. Basicly just look over the fuel and ignition system.
good luck




All times are GMT -5. The time now is 08:39 PM.