Any reason to use a single Jwis/Rollmaster chain/gear setup over the double? I'd really rather have the single one since you dont have to shim the oil pump and less noise, but it can only be purchased from Australia. I'm not worried about the single being weaker than the double. Any thoughts?

 

It's my understanding everything needed for the Double Roller is in the kit. My car has the double and if I recall correctly the oil pump didn't have to be shimmed.

BTW the 2xRoller is sweet!

Maybe someone else can clear this up. I'll ask SRP tomorrow when I dyno my car. Email me and I should have the right answer for sure tomorrrow.

<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

 

I like my single IRL chain that are used on Winston cup cars. (rpm 9000+) kinda on the $ side but extra ins. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

 

Ya... Everything is in the double roller kit, and it does need to be shimmed.

For 66 bucks (delivered), you can get the single Jewis chain and Rollmaster gears from Darren in Australia. I can't see any reason you would need anything better than that setup.. But thats your call.

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Kimchee and Rice:
<strong>Ya... Everything is in the double roller kit, and it does need to be shimmed.

For 66 bucks (delivered), you can get the single Jewis chain and Rollmaster gears from Darren in Australia. I can't see any reason you would need anything better than that setup.. But thats your call.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Kimchee,

throw us a link on that one!

 

Timing Chain Set, Rollmaster/Jwis, $66
KB Engine Parts (Australia), Darren

kbengineparts@hotmail.com

Took a couple of days to get a reply via his e-mail address, but once I sent him my card number, Darren had the parts to me in Phoenix within about 6 days of mailing. Billed my Mastercard $66.85

Very clean deal with no problems.

Ron,

_______________________________________________

<small>[ December 03, 2002, 02:10 AM: Message edited by: Kimchee and Rice ]</small>

 

I got my single row Rollmaster through HOWQUICK (John Lloyd at Streetquick Performance - email: streetquick@bigpond.com ). With shipping from Australia it came to ~$80 if I remember correctly. This setup is plenty for a heads/cam application and is a direct replacement. No shimming or oil pan removal required. I can email pics to those interested. John was a great guy to deal with - fast, friendly, and no problems.

<small>[ December 03, 2002, 11:23 AM: Message edited by: Fulton 1 ]</small>

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Kimchee and Rice:
<strong>
For 66 bucks (delivered), you can get the single Jewis chain and Rollmaster gears from Darren in Australia. I can't see any reason you would need anything better than that setup.. But thats your call.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">http://www.angelfire.com/biz/kbengin...ollmaster.html

http://www.angelfire.com/biz/kbengin...rollmaster.GIF

Did you receive [for $66] what is pictured above, but as a single roller part?

Thanks!

 

Just an FYI, it's Iwis not Jwis.

www.iwis.com

 

got mine from howquick as well

<img src="http://www.carcoders.com/strife/ROLLLS1.jpg" alt=" - " />

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Kimchee and Rice:
<strong>
Very clean deal with no problems.
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Will it work the C5 ASP pullie?

 

Will it work with the ASP pulley on Fbods and also is the single adjustable just like the double? Thanks.

 

Is it a lot harder to install a double than a single?

 

I guess my question might have been quit confusing. Does the single rollmaster allow you to advance or retard the cam like the double rollmaster chain allows.

 

Anybody??????

 

I am in Korea. The single timing set I ordered from KB Engines was delivered to Phoenix. I have not seen it yet, but, there is only one (1) single Rollmaster set avail.

The gears are made by Rollmaster (Romac Inc)in Australia. The chain is made in Germany by Iwis Ketten. BTW, Rollmaster [does not] manufacture chain.

I was told that the single set has an adjustable crank gear. Can be adjusted in increments of 2 degrees.

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Pro Stock John:
<strong>Just an FYI, it's Iwis not Jwis.

www.iwis.com</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Sure is a damn confusing logo for a company named iwis: <img src="http://www.iwis.com/antrieb/img/antrieb_main_logoi.gif" alt=" - " />

 

Scoggin Dickey has the Rollmaster 2x Roller for $65

http://www.sdpc2000.com/cart.asp?act...art&catid=2267

The heat treated one is $85

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif"> Sure is a damn confusing logo for a company named iwis: </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Sure is! Has iwis everywhere, then has jwis euro chain floating across the screen <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />

Dan

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 99 Black Bird T/A:
<strong>Scoggin Dickey has the Rollmaster 2x Roller for $65

http://www.sdpc2000.com/cart.asp?act...art&catid=2267

</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thanks for that link, I just ordered mine. $74 shipped <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />