Question about the main bolts that go through the outside of block...
12-10-2002, 06:21 PM
#1
Senior Member
Thread Starter
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
Question about the main bolts that go through the outside of block... I was reading the Haynes manual and it says to replace the outter most main bolts with new ones because of the O-ring. I pulled mine and I dont have O-rings. I just got alot of that good ol' GM RTV (orange silacone) Did this change on 2001+? The manual only covers up to 2000.
TIA <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
TIA <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
12-10-2002, 06:25 PM
#2
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about the main bolts that go through the outside of block... The reason GM wants you to replace these bolts is because there is a sealer on the head of the bolt to prevent oil from leaking out. These bolts are fairly cheap at your local GM parts dealers, so I would just replace them. If you don't feel like spending the extra $$, put some sort of sealer on the face of the bolt and you should be good to go.
12-10-2002, 06:29 PM
#3
Senior Member
Thread Starter
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about the main bolts that go through the outside of block... Thanks Jason! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
One other Question.
Do you also have to replace the Main bolts on a rebuild? I knw the head bolts you do, but how about the mains?
One other Question.
Do you also have to replace the Main bolts on a rebuild? I knw the head bolts you do, but how about the mains?
12-10-2002, 06:32 PM
#4
TECH Apprentice
Join Date: Oct 2002
Location: Woodstock, IL.
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about the main bolts that go through the outside of block... yes they are pretty cheap. the part number is 12556127 they come in a packeage of five you will need two pacages. you may want to replace all the main bolts while you are taking it apart. the numbers are 12560273 and 12560272. if you realy want to upgrade ARP also makes main studs, and bolts
12-10-2002, 06:38 PM
#5
TECH Apprentice
Join Date: Oct 2002
Location: Woodstock, IL.
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about the main bolts that go through the outside of block... I must have been posting at the same time... I replaced mine. It doesn't say you have to in the manual, but I would
12-10-2002, 06:38 PM
#6
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about the main bolts that go through the outside of block... The 20 main bolts don't have to be replaced. However, as LS1swap said, it wouldn't be a bad idea to get new ones.
12-10-2002, 07:42 PM
#7
Senior Member
Thread Starter
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about the main bolts that go through the outside of block... Thanks a ton guys! Im thinking ablut using studs for the mains. Just wanted to make sure <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
