Did anyone try this CAM?
On The Tree
Joined: Sep 2002
Posts: 100
Likes: 0
From: Tejas
Re: Did anyone try this CAM? Hey, that's the cam I have, except mine is on a .570 lift. Unfortunelty, I can't answer your questions because mine is still in the closet. It won't go in till I have heads. I've been told it's a great street racing cam for a daily driver, which is what I was looking for. I have also been told it will idle good in my A4, so you should have no problems in an M6. The two other cars I've seen with this cam both had heads, and were well over 400hp. I bet you could get right at 400 with all the bolt ons and an M6.
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Re: Did anyone try this CAM? Mike Hoffpauir is using this cam with stock heads and having great success with it. Read his post in the drag racing section about going 10s with stock heads:
https://ls1tech.com/ubb/ultimatebb.p...c;f=5;t=003399
https://ls1tech.com/ubb/ultimatebb.p...c;f=5;t=003399
Re: Did anyone try this CAM? </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Jason99T/A:
<strong>Mike Hoffpauir is using this cam with stock heads and having great success with it. Read his post in the drag racing section about going 10s with stock heads:
https://ls1tech.com/ubb/ultimatebb.p...c;f=5;t=003399</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Impressive, im starting to like this cam more than the TR224 114. I dont think he has dyno'd his car with this cam yet. Anyone did dyno his car with this cam?
<small>[ December 23, 2002, 02:55 AM: Message edited by: LSs1Power ]</small>
<strong>Mike Hoffpauir is using this cam with stock heads and having great success with it. Read his post in the drag racing section about going 10s with stock heads:
https://ls1tech.com/ubb/ultimatebb.p...c;f=5;t=003399</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Impressive, im starting to like this cam more than the TR224 114. I dont think he has dyno'd his car with this cam yet. Anyone did dyno his car with this cam?
<small>[ December 23, 2002, 02:55 AM: Message edited by: LSs1Power ]</small>
TECH Fanatic
Joined: Nov 2001
Posts: 1,055
Likes: 0
From: Baton Rouge, LA
Re: Did anyone try this CAM? Thanks Jason <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I do run that cam. It has great drivability and is excellent for a daily driver. Unfortunately I do not have dyno numbers.
I do run that cam. It has great drivability and is excellent for a daily driver. Unfortunately I do not have dyno numbers.
