Will 918's work?
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Will 918's work? I'm installing 2.02/1.60 valves in a 02 LS6 Head.The Cam is a TR 224 on 112.
Here is the plan
1- Just run 918's
or
2- Run 918's and an ARE rev kit that puts springs on the lifters.
What do you think will be good for my setup?
Here is the plan
1- Just run 918's
or
2- Run 918's and an ARE rev kit that puts springs on the lifters.
What do you think will be good for my setup?
Re: Will 918's work? I agree the 918 should be fine and I would also recommend the titanium retainers as well. There should be no need for a REV kit.
<small>[ December 22, 2002, 10:01 AM: Message edited by: Paul @ Thunder ]</small>
<small>[ December 22, 2002, 10:01 AM: Message edited by: Paul @ Thunder ]</small>