346/7 N/A plus spray
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Sep 2004
Posts: 703
Likes: 0
From: Lubbock, Texas
346/7 N/A plus spray ok looking at building my Ls6 block. i am already running a MS4 and thinking about PRC 1.5 LS6 heads. looking for sugestions on pistons, rods, and compresion ratio. thinking about using the stock crank if its not badly hurt. the car is a weekend driver M6, 9" w/ 4.10 and will be running a bunch of spray through it prolly a 200
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Sep 2004
Posts: 703
Likes: 0
From: Lubbock, Texas
Originally Posted by PREDATOR-Z
callies rods, Wiseco nitrous pistons, 2cc valve reliefs and a mill on the heads.
what CC on the heads? thinking about 11-1 compresion since it just a cruiser and track car
