had my heads(241's) milled .028... and now going to be using the GM ASA cam 226/236 .525/.525... head gasket is the GM MLS i got from SDPC...

what size pushrods do i need..

 

should still be able to use 7.4's

I'm gonna be running 7.4 on a set of 5.3 heads milled .030 with some Autozone gaskets that are .041 compressed. I talked to Jon@TSP, Gunnar@patriot & Bo White about my set-up & pushrods to make sure I'd be ok with milling that much.

Anything over .030 & I'd get a pushrod checker.