Almost cam time
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: St Paul, MN
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Almost cam time
Finally going to be getting some money here and I have been dying to cam my car (after the suspension is done). This is a street car with some auto-x and back road runs. Looking for a nice torquey cam that keeps my rev limiter under 6500 and is somewhat different. So I'm about 80% sure I'm gonna order up a 224/228 109+1 on XER lobes (.581/.588).
8* of overlap should sound pretty good through the dumps and shouldn't be incredibly hard to tune, which I will be doing via HPTuners. Just looking for some feedback and recommendations. Mods in sig and the DCR should be around 8.25-8.3 if I don't totally suck at math.
8* of overlap should sound pretty good through the dumps and shouldn't be incredibly hard to tune, which I will be doing via HPTuners. Just looking for some feedback and recommendations. Mods in sig and the DCR should be around 8.25-8.3 if I don't totally suck at math.
#3
TECH Senior Member
iTrader: (9)
yo, I got a cam the specs are *I think* 224/228 .581/.588 on a 114lsa that came out of a motor I bought, if you think you may like it, hit me up, im looknig to sell it cheap
Im going with a 228R cam so I have no need for that old cam. I bought the motor from speed inc out of an 02T/A with 32k miles. no idea how long the cam was in it but made 412rwhp through an M6 with aRE ported ls1 heads on it.
Im going with a 228R cam so I have no need for that old cam. I bought the motor from speed inc out of an 02T/A with 32k miles. no idea how long the cam was in it but made 412rwhp through an M6 with aRE ported ls1 heads on it.