MS3 Owners?
MS3 Owners? Questions for MS3 owners
How much did you mill your heads? ccs
What compression are you running w/MS3?
What size valves are in your heads?
How much did you flycut the pistons?
Thanks for any information.
How much did you mill your heads? ccs
What compression are you running w/MS3?
What size valves are in your heads?
How much did you flycut the pistons?
Thanks for any information.
11 Second Club
iTrader: (27)
Joined: May 2005
Posts: 6,799
Likes: 5
From: Your girl's back door giving her the long stroke while you're at work
Some quick answers I'm running the Stg. 2.5 5.3 heads on my car so what ever they come from TSP
I think the compression is around 10.8:1
The valves are 2.02/1.57
I didn't have to flycut the pistons
I think the compression is around 10.8:1
The valves are 2.02/1.57
I didn't have to flycut the pistons
Staging Lane
Joined: May 2007
Posts: 95
Likes: 0
From: ??????????
I got the PRC 1.0 from TSP.Didn't flycut. Don't know about the compression. Don't think the heads were milled. Just make sure you measure your valve springs good. When mine were put on the first time the springs weren't measured good and my valves were tapping the piston. Had a 1/4 moon. Valves were still good. Remeasured everything and they were good after redoing them.
