cam makers?
cam makers? whats the difference between the cams why buy from the car shop's/cam company's and the cam shops who ground the to spec for you but are not a big business or nationally known? the reason i ask is, I have a friend who can get this place to ground me a cam to my exact spec for real cheap! they use a stock cam and then reground it to spec? cam experts give me the "pro's" and "con's" of this! 
There are limits you get to when regrinding a stock cam. With any worthwhile grinding, you go beyond the hardening in the cam surface. What you're left with is a softer area that can go flat in a very short time period.
Pros? Low cost, precise valve events.
Cons? Either limited lift/ramp rates or limited longevity.
Pros? Low cost, precise valve events.
Cons? Either limited lift/ramp rates or limited longevity.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
Originally Posted by Patrick G
There are limits you get to when regrinding a stock cam. With any worthwhile grinding, you go beyond the hardening in the cam surface. What you're left with is a softer area that can go flat in a very short time period.
Pros? Low cost, precise valve events.
Cons? Either limited lift/ramp rates or limited longevity.
Pros? Low cost, precise valve events.
Cons? Either limited lift/ramp rates or limited longevity.
