Heads coming off

Reply Subscribe

Thread Tools

Search this Thread

Jul 4, 2007 | 05:04 PM

DevonsZ

Thread Starter

11 Second Club

iTrader: (20)

Joined: Mar 2005

Posts: 575

Likes: 0

From: J.C.

Heads coming off

Well I had a lifter fail on me the other week so the heads have to come off to replace them all. I figure while there off they may as well be worked over at the machine shop. My question is how much can I have my stock heads (241's)milled running my Torquer V.2 232/234dur .595/.598lift 114lsa using new stock gaskets and using my hardend comp 7.4 pushrods? I've read 15-30 thousandths in different searchs I just wanted to know if someone on here could tell me for sure?

Thanks in advance for any help.

Jul 4, 2007 | 05:08 PM

Mssingkid

TECH Enthusiast

iTrader: (7)

Joined: Apr 2004

Posts: 546

Likes: 0

From: Carmel, NY / ATL, GA

I'm sure 30 easy. Why don't you have them measure how much room you have before they rip off the heads?? Shouldn't add to much time to tear down...

Jul 4, 2007 | 05:35 PM

DevonsZ

Thread Starter

11 Second Club

iTrader: (20)

Joined: Mar 2005

Posts: 575

Likes: 0

From: J.C.

Quote:

Originally Posted by Mssingkid

I'm sure 30 easy. Why don't you have them measure how much room you have before they rip off the heads?? Shouldn't add to much time to tear down...

I have no idea how to measure that. Im doing all the work myself as far as teardown & assembley.

TTT...

Jul 4, 2007 | 06:58 PM

DevonsZ

Thread Starter

11 Second Club

iTrader: (20)

Joined: Mar 2005

Posts: 575

Likes: 0

From: J.C.

Oh, i'll be getting a new cam because of the lifter damage. I just figured i'd go with the same thing again because it worked great, unless I can go bigger(234/238dur .600/.600lift lsa? is what I was thinking) and still clear the heads with milling.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last