G5-X2 dyno numbers in automatic Z28
05-11-2003 | 03:41 AM
#1
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Nov 2001
Posts: 1,032
Likes: 0
From: Wichita Falls,TX
G5-X2 dyno numbers in automatic Z28 2002 Z28, automatic, 3800 TCS convertor, through the mufflers, MMT dyno, base tune on new motor, 435 rhp, 408 torque. 
The motor is a 370 cube with CNC LS6 heads. It starts easy, idles at a steady 950 rpm. This is in my daily driver. The low speed driveability is amazing for a cam this big. Great cam, Lou!
The motor is a 370 cube with CNC LS6 heads. It starts easy, idles at a steady 950 rpm. This is in my daily driver. The low speed driveability is amazing for a cam this big. Great cam, Lou!
05-11-2003 | 04:39 AM
#2
Re: G5-X2 dyno numbers in automatic Z28 very nice, im assuming the converter was locked due to the lower torque numbers than hp? though its a bigger motor, 950 rpm idle for a cam that big rocks.
