Question on Heads
#2
Moderator
iTrader: (20)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bare heads are just that, they are bare. They usually don't have valves, springs, retainers, or locks, sometimes without guides even.
Assembled heads have everything except the pushrods, rockers, and gaskets, ready to bolt on. All important measurements, like installed height and coil bind, are checked and setup for you.
Assembled heads have everything except the pushrods, rockers, and gaskets, ready to bolt on. All important measurements, like installed height and coil bind, are checked and setup for you.