Cam for PRC 2.5 ls6 heads ?
Thread Starter
11 Second Club
iTrader: (11)
Joined: Aug 2005
Posts: 574
Likes: 0
From: St. Petersburg, FL
Cam for PRC 2.5 ls6 heads ? Hey everyone,
I'm doing my first heads & cam build up and need some suggestions on my combo. I have a set of PRC 2.5 ls6 heads that are unmilled. I leaning towards running the Torquer V3 on a stock short block with cometic .040 head gaskets. I pretty sure this set up shouldn't have any ptv issues and the dcr should be good. Any input would be great. The car is a daily driver and sees about 500 miles a week. I also have all supporting mods pp tb, ls6 intake, dynatech longtubes, & 9" with 3.90 gears.
Thanks
Scott
I'm doing my first heads & cam build up and need some suggestions on my combo. I have a set of PRC 2.5 ls6 heads that are unmilled. I leaning towards running the Torquer V3 on a stock short block with cometic .040 head gaskets. I pretty sure this set up shouldn't have any ptv issues and the dcr should be good. Any input would be great. The car is a daily driver and sees about 500 miles a week. I also have all supporting mods pp tb, ls6 intake, dynatech longtubes, & 9" with 3.90 gears.
Thanks
Scott
