cam install question
Thread Starter
12 Second Club
iTrader: (33)
Joined: Jan 2005
Posts: 2,584
Likes: 0
From: winter springs, fl
cam install question to do the jrp lift method of holding the lifters up, do i need to removed the rocker arms and pushrods. Im asking this because ive already swapped my springs. thanks
I would think so, the lifters aren't going to stay up high enough to slide the tool in since the pushrods will be driving them down on to the cam lobes.
But, at least the rockers and pusrods are the easy part.
But, at least the rockers and pusrods are the easy part.
Thread Starter
12 Second Club
iTrader: (33)
Joined: Jan 2005
Posts: 2,584
Likes: 0
From: winter springs, fl
Originally Posted by z28ss4me
I would think so, the lifters aren't going to stay up high enough to slide the tool in since the pushrods will be driving them down on to the cam lobes.
But, at least the rockers and pusrods are the easy part.
But, at least the rockers and pusrods are the easy part.