What pushrod length with milled heads?
01-31-2003, 11:43 PM
#1
Teching In
Thread Starter
Join Date: May 2002
Location: Palm Harbor, FL
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
What pushrod length with milled heads? Got 5.3 heads milled out .15 and a TR 224 cam.. those 7.4 rods gonna work out or am i gonna need the 7.350s and some shims or what am i looking at..search is not being freindly today.
02-01-2003, 12:40 AM
#2
? ? ? ? ? ?
iTrader: (16)
Join Date: Nov 2001
Location: East of Dallas
Posts: 7,056
Likes: 0
Received 0 Likes
on
0 Posts
Re: What pushrod length with milled heads? You are just fine with the stock 7.4" length without shims. Your cam is going to have a smaller base circle so milling your heads actually helped get the pushrods closer to a stock preload.
