what do u guys think
09-23-2007, 06:23 PM
#1
TECH Regular
Thread Starter
iTrader: (19)
Join Date: Apr 2007
Location: longbeach CA
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
what do u guys think im thinking about buying stock 241 heads for my transam its a 99 and get the stock 241 heads ported and polished do u guys think it will make more power if i switch to the 241 heads and put a small cam or just keep my stock heads and put a small cam
09-23-2007, 08:16 PM
#4
TECH Addict
iTrader: (14)
Join Date: May 2005
Location: Simi Valley, CA.
Posts: 2,727
Likes: 0
Received 0 Likes
on
0 Posts
I'm in the same boat as you but i'm doing most of the work myself. Well except the heads i'm porting are 853's. Got em' for $125 a couple of years ago. Finally took em' apart.
Already have Ti retainers. Gonna re-use stock valves, spring pads, and locks. Just need springs (918) and valve stem seals.
One word of advise, check all the valve guides. The heads i bought only had 20K miles on them. i took them apart to check for cracks, etc and one of the damned guides was broken in half.
Already have Ti retainers. Gonna re-use stock valves, spring pads, and locks. Just need springs (918) and valve stem seals.
One word of advise, check all the valve guides. The heads i bought only had 20K miles on them. i took them apart to check for cracks, etc and one of the damned guides was broken in half.