Rowin Gearz

iTrader: (3)

I broke a rocker bolt in my '01 SS last weekend. I'm looking for an aftermarket replacenemt but can't come up with a suitable one. I ordered some from Comp, but the big end is 3/8" and I don't want to bore my YT rockers to make the studs work. Edelbrock also makes an aftermarket bolt, but it is shorter than stock and is designed for ported/milled heads. This car has stock unmilled 241 casting heads, PRC dual springs,and YT 1.7's. I would really like to find an aftermarket replacement...rather than install new stock replacements. I don't want to wrap a ton of money up in this repair because I will be ripping it all apart in January for a LSX 454 install. I would like to get it running and would like to reuse the aftermarket bolts/studs on the new LSX build.

JPH

iTrader: (2)

Edelbrock Has Them. #8597 Is The Part Number.

99blancoSS

iTrader: (115)

I've got some I'll sell you. I've got a box of 100. Bought them when I did my YT's 8m x1.25 Metric head, cant remember the size offhand

vettenuts

iTrader: (4)

If I am not mistaken, are these made for them by ARP? I seem to recall reading that somewhere, although they are shorter than stock as I remember.

JPH

iTrader: (2)

yes, they are made by arp, and shorter so they don't protrude into the intake runners like stock ones do.

99blancoSS

iTrader: (115)

It isnt rocket science its socket head cap screw m8 x1.25 x45 mm. I've got the same rockers. You either want a deal on a set of new bolts or you dont. 12.9 same as ARP.

Jeeesssuus that Edelbrock kit is expensive. $25-$40 depending on who you go to and it only has 8 bolts in it. PM me for a much better deal.. anyone