Piston & rod trouble
Piston & rod trouble I'm getting some wiseco or diamond forged stock bore flat top pistons, which ones would you recommend me? I am thinking on getting some scat rods, will I have any trouble with the scat rods and any of these pistons? Scat has 6.098 or 6.125 so the lenght will not be trouble, but im worried more about the pin or ring issues, hope you can help me, thanks
I'm getting some wiseco or diamond forged stock bore flat top pistons, which ones would you recommend me? I am thinking on getting some scat rods, will I have any trouble with the scat rods and any of these pistons? Scat has 6.098 or 6.125 so the lenght will not be trouble, but im worried more about the pin or ring issues, hope you can help me, thanks
Teching In
Joined: Jun 2008
Posts: 16
Likes: 3
From: San Tan Valley, AZ
Scat rods do not have the correct offset for an LS, they use the same blank as they do for the SB Chevy. We've been trying to talk sense into them for about a decade.
That is the main reason I recommend Molnar.
That is the main reason I recommend Molnar.
Last edited by Mark O'Neal; May 23, 2024 at 07:46 PM.
