383 cam
Just so alot of yall who are saying 11's no problem, know......we are at a higher elevation than most yall that have posted.....Our DA usually stays around 5500...11's are just a lil bit harder....lol
With those PRC heads being a little small for a fire breathing 383, you will want a little more overlap to make best power under the curve NA.
238/242 .615/.610 111LSA +2 would be great NA.
For a 200 shot, you'll want to keep the IVO, IVC, EVC and overlap the same for what works best NA, but open the exhaust valve 8 degrees earlier (to lessen pumping losses on the spray). The resulting nitrous cam would be:
238/250 .615/.615 113LSA +4
Please note, this cam has the same IVO, IVC, EVC and overlap as the NA cam. The exhaust valve is opened 8 degrees earlier. This would rock on the spray plus give a very strong mid-range punch.
238/242 .615/.610 111LSA +2 would be great NA.
For a 200 shot, you'll want to keep the IVO, IVC, EVC and overlap the same for what works best NA, but open the exhaust valve 8 degrees earlier (to lessen pumping losses on the spray). The resulting nitrous cam would be:
238/250 .615/.615 113LSA +4
Please note, this cam has the same IVO, IVC, EVC and overlap as the NA cam. The exhaust valve is opened 8 degrees earlier. This would rock on the spray plus give a very strong mid-range punch.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
You dont need a huge cam with a 383 stroker to get to/close to 500whp. My Lunati 383 383 has a medium sized Cartek cam (234/.600/113) and put 492 to the wheels with conservative pump gas timing. It is all on the heads and the tune, not just having a big *** cam.
Last edited by Goldfinger911; Jan 29, 2008 at 12:33 AM.
What ever you do, don't over cam it. That is a common mistake with wanting more power. In some cases, less is more and more can be less.
I'm building a 383 right now and I'm going with a T-Rex that came in this car I bought. It's a 242/248 On a 110lsa. I'm not real sure on the lift. I think this will work well for a drag set up. But it could be taylor made to squeak a little more out of it. But should achieve my goals just fine.
You should really consider the specs Patrick G recommended, he is very good at speccing cams and really knows what he is talking about. If not something very close to that with similar valve events.
I'm building a 383 right now and I'm going with a T-Rex that came in this car I bought. It's a 242/248 On a 110lsa. I'm not real sure on the lift. I think this will work well for a drag set up. But it could be taylor made to squeak a little more out of it. But should achieve my goals just fine.
You should really consider the specs Patrick G recommended, he is very good at speccing cams and really knows what he is talking about. If not something very close to that with similar valve events.
