LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Generation III Internal Engine
bone looking thing

Generation III Internal Engine 1997-2006 LS1 | LS6

Sponsored by:

bone looking thing

Reply Subscribe

Search this Thread

Old

Jan 28, 2008 | 04:46 PM

#1

Thread Starter

Banned

iTrader: (27)

Joined: Jan 2006

Posts: 1,205

Likes: 0

Default

bone looking thing

anyone know where this goes, looks like a bone, o-ring on one side and threads on the other. about 3-4inches long and white.

Old

Jan 28, 2008 | 04:56 PM

#2

TECH Junkie

iTrader: (2)

Joined: Jan 2006

Posts: 3,776

Likes: 0

From: Fort Wayne, IN

Default

DUMBELL, it goes in the back of the block. It is what makes the motor have oil pressure.

Old

Jan 28, 2008 | 04:59 PM

#3

Thread Starter

Banned

iTrader: (27)

Joined: Jan 2006

Posts: 1,205

Likes: 0

Default

Quote:

Originally Posted by JPH

DUMBELL, it goes in the back of the block. It is what makes the motor have oil pressure.

where abouts though, under the rear cover? on the driver side, which side goes in first?

Old

Jan 28, 2008 | 11:47 PM

#4

10 Second Club

iTrader: (10)

Joined: Jun 2004

Posts: 2,279

Likes: 1

From: Napoleonville, LA

Default

It is behind the rear cover on the drivers side bottom corner just above the block skirt/oil pan. It is the main oil galley plug and if it's not in there you will have zero oil pressure. The side with the o-ring faces out.

Old

Jan 30, 2008 | 04:32 PM

#5

TECH Junkie

iTrader: (2)

Joined: Jan 2006

Posts: 3,776

Likes: 0

From: Fort Wayne, IN

Default

Quote:

Originally Posted by 5.3LJimmy

It is behind the rear cover on the drivers side bottom corner just above the block skirt/oil pan. It is the main oil galley plug and if it's not in there you will have zero oil pressure. The side with the o-ring faces out.

THAT IS CORRECT.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 05:28 PM.