Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

HELP Ticking Noise!!!!

Old Jul 22, 2003 | 08:17 AM
  #1  
John98LS1's Avatar
Thread Starter
TECH Resident
iTrader: (6)
 
Joined: Dec 2002
Posts: 950
Likes: 0
From: Houston, TX
Default HELP Ticking Noise!!!!

I have this ticking noise and i dont know what it is!!! my mods are in my sig. this noise is not a exsaust leak! the first time i got rid of the noise i had a loose rocker, then 3 weeks later it did it agian i thought it got loose agian, nope every rocker was tight i took off the ffirst 3 and put lock tight on them and the ticking noise is still there!!!!!! this is all on the drivers side. please help!!! thanks!!
Reply
Old Jul 22, 2003 | 01:40 PM
  #2  
John98LS1's Avatar
Thread Starter
TECH Resident
iTrader: (6)
 
Joined: Dec 2002
Posts: 950
Likes: 0
From: Houston, TX
Default Re: HELP Ticking Noise!!!!

ttt
Reply
Old Jul 22, 2003 | 01:45 PM
  #3  
Wease's Avatar
On The Tree
 
Joined: Nov 2001
Posts: 161
Likes: 0
From: Delaware, OH
Default Re: HELP Ticking Noise!!!!

Did you check the belt and pulleys? One of my pulleys makes a funny ticking sound when the car is cold. But it goes away after it warms up. At first I thought it was one of the rockers, but it's not. I haven't looked too much into it yet. If if gets worse, I will...
Reply
Old Jul 22, 2003 | 01:48 PM
  #4  
LeadFoot2's Avatar
Staging Lane
 
Joined: Oct 2002
Posts: 76
Likes: 0
From: Mckinney, TX (north north Dallas)
Default Re: HELP Ticking Noise!!!!

Hopefully it's not a spun bearing.....
Reply
Old Jul 22, 2003 | 02:00 PM
  #5  
Gold Phoenix's Avatar
11 Second Club
iTrader: (1)
 
Joined: Jan 2002
Posts: 1,161
Likes: 1
From: Indianapolis Area
Default Re: HELP Ticking Noise!!!!

Did you ever do a 3-2 misshift at the track? How long has it been doing it?
Reply
Old Jul 22, 2003 | 02:11 PM
  #6  
rnr27band1's Avatar
TECH Resident
 
Joined: Mar 2002
Posts: 776
Likes: 0
From: Augusta GA, Atlanta GA (school)
Default Re: HELP Ticking Noise!!!!

Might be a bent pushrod form the loose rocker.
Reply
Old Jul 22, 2003 | 03:54 PM
  #7  
John98LS1's Avatar
Thread Starter
TECH Resident
iTrader: (6)
 
Joined: Dec 2002
Posts: 950
Likes: 0
From: Houston, TX
Default Re: HELP Ticking Noise!!!!

well its not a bent push rod, its been doing it for awhile, but at 1 time i got rid of it, then it came back, also not a spun bearing, runs to good. thanks for the help
Reply
Old Jul 22, 2003 | 10:08 PM
  #8  
VTtransam's Avatar
Launching!
 
Joined: Jul 2002
Posts: 260
Likes: 6
From: Pittsburgh, PA
Default Re: HELP Ticking Noise!!!!

Under what conditions does the noise occur? Can you tell the area where it is coming from? It could be a number of things. Have you touched the oil pump at all? If so, It could be related the the pick up tube O-ring. I had that problem a couple months ago.

Matt
Reply
Old Jul 22, 2003 | 10:15 PM
  #9  
Darkhalf's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Jul 2002
Posts: 307
Likes: 0
From: Des Moines, IA
Default Re: HELP Ticking Noise!!!!

I realize you said you don't think its an exhaust leak, but do you still have your AIR system on your car? In particular your AIR tubes? You might have a burnt check valve. A lot of times when the check valve goes they make a ticking noise.
A new check valve and the AIR restrictor mod will take care of it.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:52 PM.