what springs to run??
#1
TECH Resident
Thread Starter
iTrader: (6)
Join Date: Dec 2002
Location: Houston, TX
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If im going with a 581 lift cam which valve spring should i go with? i dont want to have to change them out every 10K!!! are comp 918's good?? thanks
#4
!LS1 11 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Again, 918's do the job- that's what I run. But, I'll be swapping them out at 15k-18k to be on the safe side. Next time I'll do Revs (and maybe a bigger cam!
).
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#6
LS1Tech Premium Sponsor
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We run the manley springs with titanium retainers. They sell for 269.99. With that much lift it never hurts to go ahead & spend the extra $$ & go with a titanium retainer with manley's or comps ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com