Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

PCV hose

Thread Tools
 
Search this Thread
 
Old Apr 11, 2008 | 11:11 AM
  #1  
Altekameraden's Avatar
Thread Starter
Staging Lane
iTrader: (4)
 
Joined: Mar 2008
Posts: 51
Likes: 0
From: Monahans, TX
Default PCV hose

2002 WS6 transam M6 headers magnaflow roller rockers
I pulled my PCV hose today and turned the vehicle on let it idle and then reved it to 2,500. A lote of smoke/steam was coming out of the hose and it stoped coming out of the exhaust for a while and then it started coming back out of the exhaust instead, so i'm clueless. It didnt smell like oil burning like my exhaust does, the smoke was blue from the pipes and I ran through 2 quarts in 4 days (INSANE) so help needed please. I was wandering what should be coming out of the pcv hose, and could a valve seal leak this bad. It smokes at start up, idle and rev.
Reply
Old Apr 11, 2008 | 05:11 PM
  #2  
kenp's Avatar
11 Second Club
iTrader: (9)
 
Joined: Nov 2004
Posts: 795
Likes: 2
From: Cincinnati Area
Default

There are a lot of previous posts that address this issue. Leak down teat, valve guide seals, rings....
Reply
Old Apr 12, 2008 | 09:53 PM
  #3  
Bill Bowling's Avatar
TECH Addict
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (6)
 
Joined: Apr 2003
Posts: 2,597
Likes: 4
From: Lawrenceville, GA
Default

I would do a leak down test to start.

Bill
Reply
Old Apr 12, 2008 | 11:04 PM
  #4  
PREDATOR-Z's Avatar
TECH Senior Member
 
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Default

actualy compression and leakdown both together.
Reply




All times are GMT -5. The time now is 04:56 AM.