PRW info

Reply Subscribe

Thread Tools

Search this Thread

May 6, 2008 | 08:30 AM

twospeed

Thread Starter

On The Tree

Joined: May 2006

Posts: 118

Likes: 0

From: Tampa,Fl

PRW info

Does anyone have any first hand information on PRW stainless rocker arms or any of their products?

May 6, 2008 | 09:35 AM

The Alchemist

UNDER PRESSURE MOD

iTrader: (19)

Joined: Nov 2001

Posts: 10,813

Likes: 15

From: Doylestown PA

Never heard of them. Post a link or pic.

May 6, 2008 | 11:32 AM

bigchuck34

On The Tree

iTrader: (14)

Joined: Mar 2006

Posts: 113

Likes: 0

From: Rochester, NY

I recently installed prw 1.7 alumminum roller rockers mine when i was buliding it. the rockers seem to be a good quaity and they fit with no grinding. i havn't run the car much because i'm waiting for a tune but the rockers seem great and were priced very good. i called prw and talked with them and they are a very good company to deal with and were very helpful. i'm very happy with the product.

May 6, 2008 | 08:31 PM

bigchuck34

On The Tree

iTrader: (14)

Joined: Mar 2006

Posts: 113

Likes: 0

From: Rochester, NY

i retract my previous statment. mike from new era flashed my car today so i could run it and get it ready for the dyno and the rockers were hitting the valve covers. wasn't a big deal i just took out the baffle on the right side and ground a few spots on the left. other than that i'm very happy with the rockers.

May 6, 2008 | 11:22 PM

studderin

TECH Senior Member

iTrader: (28)

Joined: Nov 2005

Posts: 5,556

Likes: 6

From: Rochester, NY

cool, it was easy to clearence.

That nice blue works as contact spots showing.

May 7, 2008 | 05:08 PM

bigchuck34

On The Tree

iTrader: (14)

Joined: Mar 2006

Posts: 113

Likes: 0

From: Rochester, NY

i saw the exact spots where they were hitting and just ground the valve cover a little. i did loose a little blue off the rockers but no harm done. it was an easy fix.

Reply Subscribe