Supporting mods for a TR224....
Supporting mods for a TR224.... Guys i need your honest advice here, i plan on going with the TR224 and a nice set of heads (undecided) From what i understand i need-
LS6 Oil Pump
Push Rods
Valve Springs
Injectors(OEM fuel pump still ok?)
What am i missing here to run safely, i wanna do it once, and do it rite.
School me on this one....Thanks.
LS6 Oil Pump
Push Rods
Valve Springs
Injectors(OEM fuel pump still ok?)
What am i missing here to run safely, i wanna do it once, and do it rite.
School me on this one....Thanks.
new pulley bolt, new head bolts, new headgaskets, new o-ring in the timing chain cover, etc. i would get new lifters if it was me. you can pick up new ls7 lifters for a little over $100. depending on your build, most of the time the stock injectors from 99's, 01's and 02's are fine unless you are going with more radical parts. the fuel pump should be fine again given you aren't planning anything too exotic (forced induction, etc)
