IS there something wrong with this cam. PICS
Thread Starter
On The Tree
iTrader: (10)
Joined: Jun 2007
Posts: 188
Likes: 0
From: NE Philadelphia PA
IS there something wrong with this cam. PICS So I ordered this cam off of one of the sponsors on the site along with some injectors, and a timing set. The cam was out of stock so they told me they would have COMP send it to me in a few days which was fine. So the cam showed up this week and I opened the box today. And I found this.
The one set of lobes looks like they were ground wrong maybe. I don't know this is my first build. But the other 3 sets look they match but this set looks like the intake and exhaust are way too over lapped. Or is it just firing order that I am looking at.
I just want some opinions before I call the sites sponsor. So please let me know what you think.
This is what the three sets lobes looks like.
And now the questionable.
The one set of lobes looks like they were ground wrong maybe. I don't know this is my first build. But the other 3 sets look they match but this set looks like the intake and exhaust are way too over lapped. Or is it just firing order that I am looking at.
I just want some opinions before I call the sites sponsor. So please let me know what you think.
This is what the three sets lobes looks like.
And now the questionable.
Thread Starter
On The Tree
iTrader: (10)
Joined: Jun 2007
Posts: 188
Likes: 0
From: NE Philadelphia PA
I was thinking a little wrong on this one. I had my l lobe order off, I was looking at the two intake lobes for opposite cylinders thinking one was a intake and the other an exhaust for the same cylinder, but that wasn't the case.
