Cylinder 1 Misfire
08-20-2008, 01:02 AM
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2007
Location: New Hampshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Cylinder 1 Misfire Just brought my car to get tuned, had tons of power before I brought it there, I changed the injectors when i got there. I put it on the dyno and could only manage 250whp. A/F was good. Timing is set. Put 350 on 100 shot. I got a Cylinder 1 misfire code. I disconnected my remote start which we though may have been a problem considering it's hooked up to cylinder 1 and still put down the low numbers. Also I noticed on the way home that the stall was not locking up and the car definately felt like it had no *****. Is this related? What could it be? Bad injector? Bad plug? Coil? Im gonna check everything out tomorrow but I would like to hear some imput first. Thanks
08-20-2008, 12:35 PM
#2
Well, if it ran good when you brought it there, then something changed. What got changed? Probably a bad injector (since that's what was changed). Did you change plugs?
Maybe switch the #1 cylinder injectors with another, or put in a stock injector for cylinder #1 to see if that changes things.
Maybe switch the #1 cylinder injectors with another, or put in a stock injector for cylinder #1 to see if that changes things.
