tfs clearence

Reply Subscribe

Thread Tools

Search this Thread

Sep 16, 2008 | 10:51 AM

BIGB4015

Thread Starter

Staging Lane

Joined: Apr 2008

Posts: 53

Likes: 0

From: panama city beach

tfs clearence

anyone know if 215 tfs heads milled to 59cc will clear my cam its 244/242 .612 .610 112 lsa? I am running this on a stock bottom end ls1.

Sep 16, 2008 | 01:32 PM

TrickFlowTech

LS1Tech Sponsor

Joined: Feb 2008

Posts: 300

Likes: 18

It will be very close. You will need to verify piston to valve.

__________________

https://www.trickflow.com | TFS Catalog

Sep 16, 2008 | 02:19 PM

wilwhite2kss

TECH Apprentice

iTrader: (2)

Joined: Jan 2006

Posts: 386

Likes: 0

From: Atlantic city nj

I also am also worried about clearance on the tfs 215's. Mine are milled to 61 cc with a .40 cometic gasket. I have the 7.5' pushrods and 1.7 rockers, will this setup work without any problems? cam is 233/234/604 lsa

Last edited by wilwhite2kss; Sep 16, 2008 at 03:54 PM.

Sep 16, 2008 | 03:41 PM

Tony Mamo @ AFR

Flow Wizard

iTrader: (13)

Joined: Feb 2004

Posts: 2,197

Likes: 7

Quote:

Originally Posted by BIGB4015

anyone know if 215 tfs heads milled to 59cc will clear my cam its 244/242 .612 .610 112 lsa? I am running this on a stock bottom end ls1.

With that much cam it will be very close.....close to tagging your pistons that is....LOL

You would be lucky to have .030 on the intake side....flycutting, aftermarket pistons, or a different cam should be in your future.

Tony