Another Oil Pressure Sender Question
Thread Starter
Staging Lane
Joined: Oct 2006
Posts: 70
Likes: 1
Another Oil Pressure Sender Question I have read a number of threads on the subject and found a fitting at summit that threaded right into the stock metric thread and gave me a 1/8' pipe fitting to thread a tee into for a switch and mechanical feed to a gauge.
Problem is, now my programmer says the 2007 ECM needs the stock oil sender output but I can't find a metric fitting in a tee so I can get all three outputs; mechanical pressure, switch for idiot light and pressure to the ECM.
Anyone know where to get an adapter or another place to screw in the stock sensor?
Problem is, now my programmer says the 2007 ECM needs the stock oil sender output but I can't find a metric fitting in a tee so I can get all three outputs; mechanical pressure, switch for idiot light and pressure to the ECM.
Anyone know where to get an adapter or another place to screw in the stock sensor?
Last edited by markeheiden; Apr 20, 2010 at 11:42 AM.
