Serpentine belt systems
Thread Starter
Registered User
Joined: Jan 2011
Posts: 3
Likes: 0
Serpentine belt systems Hi,
Newcomer, but I have been reading your post. I have a LY6 motor and was wondering if I strip the front down of all accessories can I put on a Serpentine belt sytem for a LS3. So I can put on a LS3 intake. I read somewhere all the LS series blocks are the same physical size and mounting positions, just the internals change.
Thanks,
Mike
Newcomer, but I have been reading your post. I have a LY6 motor and was wondering if I strip the front down of all accessories can I put on a Serpentine belt sytem for a LS3. So I can put on a LS3 intake. I read somewhere all the LS series blocks are the same physical size and mounting positions, just the internals change.
Thanks,
Mike
You can put a L76 front accessory drive on (from a g8)... Any accessory drive will fit, you may have to space the waterpump using a billet spacer to clear your timing cover. Other than the timing cover, all the accessory mounting bolt holes are the same.
