Step by Step instructions for intake manifold removal
Step by Step instructions for intake manifold removal For those who are planning to remove their intake manifold to get it ported or for other modifications, we have created step by step removal instructions.
Most weekend mechanics can do it themselves in an hour or less.
Here is the link to that page on our web site http://www.peakspeedshop.com/page6.php
Having your intake manifold and throttle body ported can be one of the lowest cost ways for you to gain more horsepower. For more information on our porting and powdercoating services, go to http://www.peakspeedshop.com/.
Most weekend mechanics can do it themselves in an hour or less.
Here is the link to that page on our web site http://www.peakspeedshop.com/page6.php
Having your intake manifold and throttle body ported can be one of the lowest cost ways for you to gain more horsepower. For more information on our porting and powdercoating services, go to http://www.peakspeedshop.com/.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Launching!
Joined: Jun 2005
Posts: 272
Likes: 0
From: Chicago Area
Here's a question for ya.....
On the front of the intake, behind the throttle body....
What are these 2 hose locations for ??
One is on the right you called #5
One is on the left you called #7b
What do these go to ??
I'm doing a LS3 intake swap onto a LY6 6.0L and I'm not sure what these are for.
On the front of the intake, behind the throttle body....
What are these 2 hose locations for ??
One is on the right you called #5
One is on the left you called #7b
What do these go to ??
I'm doing a LS3 intake swap onto a LY6 6.0L and I'm not sure what these are for.
Here's a question for ya.....
On the front of the intake, behind the throttle body....
What are these 2 hose locations for ??
One is on the right you called #5
One is on the left you called #7b
What do these go to ??
I'm doing a LS3 intake swap onto a LY6 6.0L and I'm not sure what these are for.
On the front of the intake, behind the throttle body....
What are these 2 hose locations for ??
One is on the right you called #5
One is on the left you called #7b
What do these go to ??
I'm doing a LS3 intake swap onto a LY6 6.0L and I'm not sure what these are for.
Connection #7b goes to the valley cover. It is hose #716 on that same schematic in that thread.
See our Porting Special For those who are interested in doing this great mod themselves, see our Porting Special that goes through January 15, 2012. Save up to $35! Here's the link to the thread:
https://ls1tech.com/forums/sponsor-s...y-porting.html
https://ls1tech.com/forums/sponsor-s...y-porting.html
