418 stroker intake?
Thread Starter
Teching In
Joined: Jul 2011
Posts: 24
Likes: 0
418 stroker intake? Was wondering what intake and throttle body to go with on a LS3 418? Was thinking about going with the FAST 102 but wanted some input before I went ahead with it. So open to input and suggestions.
A fast is kinda your only best bet. But your also going to have to get a 102tb with fast fuel rails and you might have to grind the top of your water pump unless you have an ls2 water pump. And you can only use skinny injectors. Just something to think about.......
Yes get the FAST 102, I got the Nick Williams 102 TB. it's much cheaper than than the FAST. You don't need the FAST fuel rails, you can use ls2/3 fuel rails they are the same. You can also resize your stock injectors to a 5? Lb injector. I'll be sending mine here http://www.stiegemeier.com/ for 175 you can't beat it. I will be pitting mine together soon so I can't comment on the w/p issue.
Speed engineering has the FAST 102 for 802.00 and ws6store.com has the TB for 339.00?
Goodluck
Speed engineering has the FAST 102 for 802.00 and ws6store.com has the TB for 339.00?
Goodluck
I run a ported stock ls3 intake. I had the fast102 but wasnt impressed so I switched back to hte ls3 intake.
IF you are running some cathedral port heads get the fast.
Hope that helps
IF you are running some cathedral port heads get the fast.
Hope that helps
