What to use from lid or MAF to TB

Reply Subscribe

Thread Tools

Search this Thread

Dec 19, 2011 | 08:24 PM

mbaker3

Thread Starter

On The Tree

Joined: Aug 2011

Posts: 131

Likes: 0

From: Lakeland, Fl

What to use from lid or MAF to TB

LQ9 bottom end, Fast 92 mm throttle body into LS3 intake and LS3 heads. The top end was LS1 stuff including a SLP lid............now for the question. What would I use to connect the stock MAF to the Fast TB? Are there adapters? The MAF is about 3" diam. and the TB is about 3-5/8" diam.......any suggestions? ...........anything that will work replacing the lid and MAF?

Last edited by mbaker3; Dec 20, 2011 at 04:09 AM.

Dec 20, 2011 | 04:09 AM

mbaker3

Thread Starter

On The Tree

Joined: Aug 2011

Posts: 131

Likes: 0

From: Lakeland, Fl

any ideas?

Dec 20, 2011 | 07:25 AM

Unertl42

TECH Fanatic

iTrader: (63)

Joined: Sep 2007

Posts: 1,041

Likes: 0

From: IA

you could use the SLP smooth bellow between the FAST and the MAF. You could also upgrade to a larger MAF, which Fast Toys Performance sells lids for both 85mm and 100mm MAFS.

Jan 9, 2012 | 01:37 PM

pontiacrazy

Teching In

Joined: Jun 2011

Posts: 21

Likes: 0

From: rapid city SD

im having the same issue with my typhoon intake...that smooth bellows just dont seem worth 65 bucks...

Jan 9, 2012 | 05:39 PM

cabel1

11 Second Club

iTrader: (3)

Joined: Sep 2007

Posts: 233

Likes: 0

From: Wisconsin

The stock bellows fits on a 85mm throttle body but I 'm not sure about a 92.

Jan 9, 2012 | 05:43 PM

babbage1109

11 Second Club

iTrader: (11)

Joined: May 2010

Posts: 1,646

Likes: 1

From: Southside,Indiana

Go to home depot or wherever. Pick up a 3inch coupler for piping. Cut it and clamp it. It works I'm running mine From Lid to 85mm maf and from Maf to tb. If it doesn't fit heat it up and it will slide on. Then just use a regular clamp for it.