Intake connection problems
#1
On The Tree
Thread Starter
Join Date: Aug 2011
Location: Lakeland, Fl
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Intake connection problems
I have a LQ9 in a 2002 Camaro. I just finished installing a cam and LS3 heads with LS3 intake, FAST 92mm throttle body, 85mm MAF and 98mm lid. After installing the intake and the TB, it seems to sit a lot lower than the LS1 intake that was on it before. I had already bought reducing sleeves to fit the OD of the TB to the MAF but it is so low that the 98mm lid isn't even close to being low enough for the MAF connection. What can I get to connect the TB to the MAF that would "angle" up enough to connect to the lid?
I know this rambled on..... but has anyone done this conversion.................. please chime in, .....how did you do it!!!
I know this rambled on..... but has anyone done this conversion.................. please chime in, .....how did you do it!!!
#2
On The Tree
Thread Starter
Join Date: Aug 2011
Location: Lakeland, Fl
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I have a LQ9 in a 2002 Camaro. I just finished installing a cam and LS3 heads with LS3 intake, FAST 92mm throttle body, 85mm MAF and 98mm lid. After installing the intake and the TB, it seems to sit a lot lower than the LS1 intake that was on it before. I had already bought reducing sleeves to fit the OD of the TB to the MAF but it is so low that the 98mm lid isn't even close to being low enough for the MAF connection. What can I get to connect the TB to the MAF that would "angle" up enough to connect to the lid?
I know this rambled on..... but has anyone done this conversion.................. please chime in, .....how did you do it!!!
I know this rambled on..... but has anyone done this conversion.................. please chime in, .....how did you do it!!!