reluctor wheel issue
#1
TECH Apprentice
Thread Starter
Join Date: Aug 2010
Location: Mexico
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
reluctor wheel issue
hi, piston seems to be too close to reluctor wheel when crank is going bdc, clearance is less than .010" already milled piston until possible, could i mill reluctor wheel for more clearance? would that be risky? about .010" clearance between piston-reluctor wheel, would that be bad?
one more thing what's the normal distance crank sensor to reluctor wheel?
thanks guys.
one more thing what's the normal distance crank sensor to reluctor wheel?
thanks guys.