Just tuned by frost. Help!!!
Thread Starter
Teching In
Joined: Dec 2014
Posts: 37
Likes: 1
From: Northeast arkansas
Just tuned by frost. Help!!! I'm throwing a p0132 code every time I clear code. I'm running brand new Bosch O2 sensors. With extentions. At first I noticed bank 1 extention was laid in header and melted only the loom. I removed it checked it swapped extentions and still the same code so I swapped bank 1 and bank 2 sensors. Same code again. Steve if your out there my friend please holler back asap!
Thread Starter
Teching In
Joined: Dec 2014
Posts: 37
Likes: 1
From: Northeast arkansas
I thought I shoved the problem but I guess not. I have checked wiring found nothing, checked spark plugs they were fouled out. Put new delco plugs in. Got better. Enough to go down the road. Then came back. Any ideas or thoughts. I went to part store and had them replaced. Same thing. I'm lost now. Any one have ideas? I've contacted steve Williams and unfortionaltly he is out of the office.. Hoped he might be on the forums. All eight plugs were suet covered, all 8 injectors are opening and closing as they should...
Last edited by Conv_z28_camaro; Apr 19, 2015 at 01:50 PM.
