which O ring for oil pick up tube?
Thread Starter
Teching In
Joined: Jul 2007
Posts: 8
Likes: 0
From: Perth WA
which O ring for oil pick up tube? I am having to fit an LS1 oil pan onto an LS3 for a conversion. I have noted that the red O ring off the LS3 is thicker than the new blue one I purchased for the LS1 hardware. The blue one appears to fit ok but I am not sure if there is any size differences ie seat/tube which means the thicker one should be used. Thanks for any guidance.
It's based off of the pick up tube that you use. If you're using the LS3 pick up tube for a 2010+ Camaro or out of a truck then use a red o-ring. If you're using an LS1 pick up tube from an f-body then use the Blue o-ring.
Lonnie
Lonnie
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900
Thread Starter
Teching In
Joined: Jul 2007
Posts: 8
Likes: 0
From: Perth WA
