Rocker arm search
Thread Starter
TECH Junkie
iTrader: (18)
Joined: Jan 2006
Posts: 3,831
Likes: 8
From: Dover, Arkansas
Rocker arm search I am in the hunt for a set of LS3, adjustable rockers that will bolt on top of the factory rocker stands. I have a set of TSP 260cc heads and want to use a low lash solid roller cam.
Thread Starter
TECH Junkie
iTrader: (18)
Joined: Jan 2006
Posts: 3,831
Likes: 8
From: Dover, Arkansas
Thread Starter
TECH Junkie
iTrader: (18)
Joined: Jan 2006
Posts: 3,831
Likes: 8
From: Dover, Arkansas
None. The yella terra adj use their own stands.
The comp adj use rocker studs. The shaft mounts are self explanatory.
I do not know of any that use the factory rail. well any QUALITY ones anyway.
Some will even need tall covers or cover spacers also if they have the adj nut on the pushrod cup.
The comp adj use rocker studs. The shaft mounts are self explanatory.
I do not know of any that use the factory rail. well any QUALITY ones anyway.
Some will even need tall covers or cover spacers also if they have the adj nut on the pushrod cup.
Trending Topics
TECH Fanatic
Joined: Sep 2005
Posts: 1,584
Likes: 23
From: NYC
There are only 3 choices for a LLSR: Jesel, T&D Machine, Crower and all three shaft mount. Don't waste you time or money on anything else and choose between aluminum or stainless steel for maximum endurance. Be very careful where you buy the above rockers, because the Chinese are knocking-off a lot of the rockers; insure they are genuine.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
LS-7 Lash Caps Hi LS-1, I have used another method for the BAJA race car engine.
The LS-7 Ti Intakes use a Lash CAP, with the same cap being fitted to a "shortned" EX Valve is possible.
This is GOOD for valve Tip protection, the use of Caps.
Then with ONE "SETUP CAP" AND 16 "proud" Lash Caps, you can get the required Lash.
ALL, most, of the OHC "bucket" engines use this method of Lash Adjustment.
Lance
The LS-7 Ti Intakes use a Lash CAP, with the same cap being fitted to a "shortned" EX Valve is possible.
This is GOOD for valve Tip protection, the use of Caps.
Then with ONE "SETUP CAP" AND 16 "proud" Lash Caps, you can get the required Lash.
ALL, most, of the OHC "bucket" engines use this method of Lash Adjustment.
Lance
Thread Starter
TECH Junkie
iTrader: (18)
Joined: Jan 2006
Posts: 3,831
Likes: 8
From: Dover, Arkansas
There are only 3 choices for a LLSR: Jesel, T&D Machine, Crower and all three shaft mount. Don't waste you time or money on anything else and choose between aluminum or stainless steel for maximum endurance. Be very careful where you buy the above rockers, because the Chinese are knocking-off a lot of the rockers; insure they are genuine.
Thread Starter
TECH Junkie
iTrader: (18)
Joined: Jan 2006
Posts: 3,831
Likes: 8
From: Dover, Arkansas
Tsp is working on a set of their steel roller tip rockers but wont be avail soon enough.
We put in a call to Harland Sharp. They have adj ls1 pedestal rockers that will work for exhaust just asking about making the intake for ls3 offset. then youd be all set!! we will let you know what we find out...hopefully tomorrow!!
We put in a call to Harland Sharp. They have adj ls1 pedestal rockers that will work for exhaust just asking about making the intake for ls3 offset. then youd be all set!! we will let you know what we find out...hopefully tomorrow!!
Thread Starter
TECH Junkie
iTrader: (18)
Joined: Jan 2006
Posts: 3,831
Likes: 8
From: Dover, Arkansas
Tsp is working on a set of their steel roller tip rockers but wont be avail soon enough.
We put in a call to Harland Sharp. They have adj ls1 pedestal rockers that will work for exhaust just asking about making the intake for ls3 offset. then youd be all set!! we will let you know what we find out...hopefully tomorrow!!
We put in a call to Harland Sharp. They have adj ls1 pedestal rockers that will work for exhaust just asking about making the intake for ls3 offset. then youd be all set!! we will let you know what we find out...hopefully tomorrow!!
I do have a set of AFR 225's I will be selling soon. I need to replace one exhaust valve first. I won't let them go out unless they are ready to run. Price will be RIGHT.
TECH Senior Member
Joined: Jun 2016
Posts: 22,290
Likes: 3,615
From: Central Cal.
