Powerstorm gm ls2/6 stage 2 pro series cylinder heads 5 axis CNC machined Custom CNC valve job Custom ground factory intake valves Custom ground factory exhaust valves Livernois .690 Lift Dual Valve springs, Titanium retainers, Upgraded locks, Upgraded Viton seals 310CFM+ of intake flow 220CFM+ of exhaust flow Call 313-561-5500 extension 104! https://cimg5.ibsrv.net/gimg/ls1tech...a94a11d82d.jpg |
I saw Cody had posted these on Camaro5, incredible deal for some one looking to stay with a set of cathedral port heads for their build. |
Originally Posted by BizZzatch350
(Post 19832884)
I saw Cody had posted these on Camaro5, incredible deal for some one looking to stay with a set of cathedral port heads for their build. |
Originally Posted by LivernoisMotorsports
(Post 19833020)
Yes I did and thanks for the support! We have been trying to show more about what we do and what we ahve to offer here at Livernois Motorsports! :cheers: I figured they would have sold by now, no core and a great deal with new springs. Used cores sell for $350, plus the valve job and machine work, plus springs, still stock heads... If I wasn't set on using L92s I would buy these. But you figure with so many folks doing 5.3 builds or older Gen 3 stuff, should be a huge demand. |
Originally Posted by BizZzatch350
(Post 19833514)
I figured they would have sold by now, no core and a great deal with new springs. Used cores sell for $350, plus the valve job and machine work, plus springs, still stock heads... If I wasn't set on using L92s I would buy these. But you figure with so many folks doing 5.3 builds or older Gen 3 stuff, should be a huge demand. |
We have these in stock and ready to ship as soon as monday! |
Originally Posted by BizZzatch350
(Post 19833514)
I figured they would have sold by now, no core and a great deal with new springs. Used cores sell for $350, plus the valve job and machine work, plus springs, still stock heads... If I wasn't set on using L92s I would buy these. But you figure with so many folks doing 5.3 builds or older Gen 3 stuff, should be a huge demand. No Cores!!! Stage 1 $999.00 CNC + Race Valve Job and professionally assembled Stage 2 $1399.00 CNC Stage 1 + Titanium retainers, new and Dual springs Stage 3 $1599.00 CNC Stage 2 + Stainless Valves Thanks LME |
Off subject but, I remember you guys used to sponsor a customer appreciation day down at Milan. Do you have plans to sponsor another one of those any time in the near future? Seeings how I am a customer and all, I always wanted to attend one these :) |
We should be doing one in may sometime and maybe one in the fall as well! |
All times are GMT -5. The time now is 04:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands