Powerstorm gm ls2/6 stage 2 pro series cylinder heads
#1
Thread Starter
FormerVendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,204
Likes: 1
From: Dearborn Heights, MI
Powerstorm gm ls2/6 stage 2 pro series cylinder heads
5 axis CNC machined
Custom CNC valve job
Custom ground factory intake valves
Custom ground factory exhaust valves
Livernois .690 Lift Dual Valve springs, Titanium retainers, Upgraded locks, Upgraded Viton seals
310CFM+ of intake flow
220CFM+ of exhaust flow
Call 313-561-5500 extension 104!
Custom CNC valve job
Custom ground factory intake valves
Custom ground factory exhaust valves
Livernois .690 Lift Dual Valve springs, Titanium retainers, Upgraded locks, Upgraded Viton seals
310CFM+ of intake flow
220CFM+ of exhaust flow
Call 313-561-5500 extension 104!
#4
I figured they would have sold by now, no core and a great deal with new springs. Used cores sell for $350, plus the valve job and machine work, plus springs, still stock heads... If I wasn't set on using L92s I would buy these. But you figure with so many folks doing 5.3 builds or older Gen 3 stuff, should be a huge demand.
#5
Thread Starter
FormerVendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,204
Likes: 1
From: Dearborn Heights, MI
I figured they would have sold by now, no core and a great deal with new springs. Used cores sell for $350, plus the valve job and machine work, plus springs, still stock heads... If I wasn't set on using L92s I would buy these. But you figure with so many folks doing 5.3 builds or older Gen 3 stuff, should be a huge demand.
#7
Thread Starter
FormerVendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,204
Likes: 1
From: Dearborn Heights, MI
I figured they would have sold by now, no core and a great deal with new springs. Used cores sell for $350, plus the valve job and machine work, plus springs, still stock heads... If I wasn't set on using L92s I would buy these. But you figure with so many folks doing 5.3 builds or older Gen 3 stuff, should be a huge demand.
No Cores!!!
Stage 1 $999.00 CNC + Race Valve Job and professionally assembled
Stage 2 $1399.00 CNC Stage 1 + Titanium retainers, new and Dual springs
Stage 3 $1599.00 CNC Stage 2 + Stainless Valves
Thanks
LME
Trending Topics
#8
Off subject but,
I remember you guys used to sponsor a customer appreciation day down at Milan.
Do you have plans to sponsor another one of those any time in the near future?
Seeings how I am a customer and all, I always wanted to attend one these
I remember you guys used to sponsor a customer appreciation day down at Milan.
Do you have plans to sponsor another one of those any time in the near future?
Seeings how I am a customer and all, I always wanted to attend one these