LS2 Harness, ECU, pedal
Thread Starter
Teching In
Joined: Feb 2019
Posts: 8
Likes: 0
LS2 Harness, ECU, pedal New guy here..I am totally new to the LS world, but I'm stoked to be here! I was wondering if a 2006 Trailblazer SS harness, ECU and throttle by wire setup will work on a used 2005 Corvette LS2 6.0L that I am about to buy. Sadly the engine is not coming with those components. I understand the ECU will have to be flashed..anything else I need to look into before buying this used harness, ECU and pedal?
It should work for the most part. But the tbss has its ecu in the front corner near battery tray. Basicly beside the power steering pump.
If im not mistaken the ecu for the vette is inside the fender on the pass side. If this is correct the tbss harness would not work without a full rewire and change around.
If im not mistaken the ecu for the vette is inside the fender on the pass side. If this is correct the tbss harness would not work without a full rewire and change around.
