Need help finding a stroker kit

Reply Subscribe

Thread Tools

Search this Thread

Feb 24, 2009 | 08:16 AM

expertrm

Thread Starter

Teching In

iTrader: (22)

Joined: Apr 2007

Posts: 21

Likes: 0

Need help finding a stroker kit

Have a LS2 Sleeved block bored to 4.125. I have L92 heads with 70cc chambers. I want as close to 11.1 compression ratio. Are there any stoker kits out there? Any suggestions?

Thanks

Feb 24, 2009 | 10:01 AM

CamaroSS22

On The Tree

iTrader: (1)

Joined: Aug 2004

Posts: 184

Likes: 4

I would just turn it into a 427. Get an eagle 4 inch crank with 6.125 rods and a standard thickness gasket and you should be right at 11:1.

Feb 24, 2009 | 11:59 AM

Bryan@LME

LS1TECH Sponsor

iTrader: (4)

Joined: Aug 2004

Posts: 301

Likes: 0

From: NW Houston

LME can offer you a rotating assembly to make a 427" 11.0:1 compression with the following parts:

-Callies Compstar 4340 4.0" stroke crankshaft
-Callies 6.125" H beam rods w/ ARP 2000 7/16" bolts
-Wiseco 4.125" bore -8cc reverse dome nitrous pistons w/ L92 valve pockets
-Total Seal Ductil Moly rings
-Clevite H series main & rod bearings
-Crankshaft balanced to 1/4 oz. in.
-Rod bearing clearances checked & adjusted for application

Price is 2449 shipped.

Feel free to ask any questions about the set up.

Thanks,
Bryan
LME
713-849-4505

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last