How much can you mill 317s...

Reply Subscribe

Thread Tools

Search this Thread

Apr 7, 2009 | 07:38 AM

BlackTA96

Thread Starter

TECH Enthusiast

iTrader: (3)

Joined: Jun 2008

Posts: 662

Likes: 2

From: Aransas Pass, TX

How much can you mill 317s...

Im looking into getting a MS3 for my 6.0
How much can you mill the heads down and still have enough PTV clearance with that cam? I want to bump the compression up a little.

Also,
Is there a particular head gasket you guys are running?

Apr 7, 2009 | 07:53 AM

smask04C5

12 Second Club

iTrader: (1)

Joined: Dec 2004

Posts: 607

Likes: 1

From: Winter Haven, Fl.

Try to limit milling to .030. That will net a 65cc chamber. As far as PTV clearance, measure it.

Apr 7, 2009 | 09:15 AM

BlackTA96

Thread Starter

TECH Enthusiast

iTrader: (3)

Joined: Jun 2008

Posts: 662

Likes: 2

From: Aransas Pass, TX

So what would be a ballpark CR with a 65cc chamber and a flat top piston.

Apr 7, 2009 | 09:36 AM

BlackTA96

Thread Starter

TECH Enthusiast

iTrader: (3)

Joined: Jun 2008

Posts: 662

Likes: 2

From: Aransas Pass, TX

I come up with about 10.8 static.
Im not sure how to come up with dynamic

would 10.8 be suitable to run on pump gas??

sorry for the dumb questions...

Reply Subscribe