After nearly 3 months of working on the engine dyno test cell, we've finally completed this project! As a lot of you guys already know, we spend countless hours engine dyno-testing our products in an effort to improve them, as well as compare them to our competitors' products. We had the new Superflow 902 custom-configured, so we will be able to begin dyno pulls as early as 2000 RPM to show complete data for a usable RPM powerband for true street vehicles!

Our engine dyno testing will begin immediately, so you can expect to see results posted up on a regular basis! We have a stock LS1 on the dyno right now that we're going to install an LS6 intake on to use as a baseline. EVERYTHING will be tested in an effort to improve on past parts. We will not accept that just because something has worked well in the past does not mean that it cannot be improved! We currently have 20 different camshafts for testing with durations below the 230 mark! We're going to perform side-by-side comparisons for every camshaft possible in an effort to maximize power for the customers' individual goals.

As a result, we will also be testing competitors' camshafts that make claims to produce super-human power. If anyone has a camshaft sitting around that you would like to be tested shoot me a PM. If we have time, we will do side-by-side testing to show how it compares to other camshafts on the market.

We plan on keeping many of the non-customer parts that we test in case anyone would like to drive/fly in to see the testing with their own eyes. Let that be a warning to people that want to try to discredit or call B.S. on any testing we're doing. THE DOOR IS ALWAYS OPEN! If someone wants to pay a little cash to cover the dyno time, we would be happy to re-dyno any combination that someone would like to see with their own eyes! We're offering honest results, good or bad. Anyone that wants to witness any of the testing needs to let us know!

Enjoy the pictures.

 

very nice

 

Project Dangermouse: New and Improved

 

Congrats to all the hard workers at Texas Speed, that's a significant accomplishment. I'm sure you're going to love having your own dyno for all your own testing, looks like y'all are destined for great things!

 

Its about time someone did this, awesome!

 

Just visited it today and spent some time with joesph and jason on the dyno, i could barely drag them away from it. Thats really gonna help with R/D and put a stop to a bunch of the bs people are putting out here about engine combos and camshaft designs. Very nice pice of equipment.

 

Very cool! You 'da man Jason!

Will you be able to figure out how to do Header side by side testing too given the constraints of the test fixture?