Torque sequence
10-23-2009, 11:09 AM
#3
TECH Apprentice
iTrader: (7)
Join Date: Mar 2007
Location: texas
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
yes. should be the exact same. these ls heads are all the same basically... they should be torqued the same way. that way there is no way the head will have any chance of "high" spots during the torque sequence
10-23-2009, 11:20 AM
#4
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Jul 2003
Location: La Porte Tx
Posts: 4,613
Likes: 0
Received 0 Likes
on
0 Posts
OK..So I torque bolts 1-9 to 22ftlbs..
then mark them, turn an addition 90*
then 1-8 an additional 90*
and then 9 and 10 50*
ending with the 5 top bolts.. 11-15 @ 22 ftlbs..
Sounds about right??
Thanks again for the info.
then mark them, turn an addition 90*
then 1-8 an additional 90*
and then 9 and 10 50*
ending with the 5 top bolts.. 11-15 @ 22 ftlbs..
Sounds about right??
Thanks again for the info.
10-23-2009, 01:02 PM
#6
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Jul 2003
Location: La Porte Tx
Posts: 4,613
Likes: 0
Received 0 Likes
on
0 Posts
First time putting a set of heads on... no
I have all new GM bolts.. putting the heads back on tonight, and needed to make sure I had this right before preceding.
